Oscilloscope News

Teledyne WaveRunner 6Zi05 August 2015 – Teledyne LeCroy announced the addition of UNIPRObus D, a MIPI UniPro Protocol Decode solution, to its oscilloscope-based MIPI capabilities. UNIPRObus D provides customers with easy-to-use debug of their UniPro signals. Similar to existing MIPI MPHY decoding capability, UniPro Decode supports HS GEAR1, GEAR2 and GEAR3, and PWM Mode (G0-G7) signaling for comprehensive data rate coverage.

03 August 2015 – Teledyne LeCroy Teledyne LeCroy CAN FD announced the addition of Symbolic (Application) layer analysis capabilities to their CAN and CAN FD serial trigger, decode, measurement, and graphing solutions. Teledyne LeCroy is the only provider of CAN FD measurement and graphing capabilities, and was the first to provide a trigger and decode solution for CAN FD. The new CAN and CAN FD Symbolic analysis packages allow a user-defined .dbc file to be used for Symbolic triggering, decoding, measurements, and graphing of a CAN or CAN FD bus.

R&S RTE oscilloscopes31 July 2015 - Rohde & Schwarz has expanded its range of trigger and decoder options for the R&S RTO and . With the R&S RTx-K50, the oscilloscopes help users debug serial protocols that employ Manchester or NRZ coding. The option can be used with a variety of standardized buses such as PROFIBUS, DALI or MVB as well as with proprietary serial protocols such as are typically found in industrial environments and in the aerospace & defense sector.

TLC WaveSurfer3000e28 July 2015 – Teledyne LeCroy introduced two new trigger and decode options for the WaveSurfer 3000 oscilloscope: CAN FD and FlexRay. The addition of CAN FD and FlexRay trigger and decode capabilities to the WaveSurfer 3000 protocol analyzer capabilities provides all the tools needed to analyze and debug automotive systems using the CAN FD and/or FlexRay serial data communication standards.

Teledyne LeCroy Probe Adapter 22 July 015 – Teledyne LeCroy introduced two new products that provide simple and easy interface of third-party probes and current measurement devices to Teledyne LeCroy oscilloscopes. The first - the TPA10 TekProbe- adapts a wide variety of Tektronix voltage and current probes and the second - the CA10 Current Sensor Adapter - adapts a wide variety of third-party current measurement devices. Both adapters attach to the Teledyne LeCroy ProBus probe interface, a standard probe interface for 20+ years that is present on the vast majority of oscilloscopes shipped by Teledyne LeCroy.

Teledyne LeCroy High Voltage Differential Probes15 July 2015 – Teledyne LeCroy introduced two new additions to the HVD3000 series of high voltage differential probes - the 2 kV safety-rated HVD3206 and the 8.4 kV safety-rated HVD3605. Like the existing 1 kV safety-rated HVD310x probes, these new probes provide excellent performance by offering the best gain accuracy, widest differential voltage range, high offset range and exceptional common-mode rejection ratio (CMRR).

Keysight MGBASE Compliance Test10 July 2015 – Keysight Technologies introduced the industry’s first compliance test application for systems using MGBASE-T networking applications. The Keysight U7236A and U7236B 10GBASE-T and MGBASE-T test applications help network design engineers turn-on and debug MGBASE-T Ethernet networking systems faster. This is accomplished by automating the execution of physical-layer tests on Keysight Infiniium 9000, S-Series, 90000A, V-Series, 90000 X-, 90000 Q- and Z-Series oscilloscopes with up to 63 GHz bandwidth.

PicoScope USB Oscilloscope - software for protocol analysis

29 June 2015 - In response to the proliferation of serial bus communications in electronic designs, the latest version of PicoScope now has decoding and analysis of sixteen protocols included as standard. When used with the deep memory included in most PicoScope oscilloscopes, this new software release creates an extremely powerful debugging and troubleshooting tool at no extra cost to PicoScope owners.

Tektronix oscilloscope - MIPI characterization24 June 2015 - Tektronix announced the industry's first commercially available oscilloscope-based solution for MIPI C-PHY physical layer transmitter characterization and debugging. The new solution allows engineers developing next-generation camera technologies using the C-PHY 1.0 interface to conduct in-depth analyses, debugging and characterization of their designs.

Tektronix oscilloscope HDMI test12 June 2015 – Tektronix expanded its portfolio of  with the addition of advanced analysis and characterization support for HDMI 2.0 receiver testing. The new HDMXpress provides complete support for HDMI test pattern generation, auto-calibration and margin testing, eliminating the needs for manual pattern creation.

Related Articles:

No related articles found


 

 Advertising