How to resolve AdBlock issue? Oscilloscope KnowledgeBase
This knowledge base contains abstracts of Oscilloscope Application Notes, Whitepapers, Articles, Blog Posts and more provided by different oscilloscope suppliers. Click on a headline in the list below and you get to the full abstract of the document. At the end of the abstract there is a link to the complete document on the website of the corresponding supplier.
You can use either a full text search or a filter function to find the document containing the information you are looking for:
- Full Text Search: enter the word or character string you are looking for (suggestions will be displayed on typing). This search is performed only in the Oscilloscope KnowledgeBase of Oscopes.info
- Filter Function: there are 3 dropdown filter functions available. All articles include tags for Application (e.g. Debugging, Bus Analysis, Power,...), Industry (e.g. Automotive, Research, Wireless,...), Author (i.e. oscilloscope supplier) and Type (Text, Youtube Video, Webinar). Best start using only one filter parameter. Keep in mind that "Industry" filter only includes tags if the document is focussing on a certain industry. Please use this filter only if needed!
Please note that you may be redirected to external websites when clicking on links!
Remark: Some entries may be marked by "PROMOTED". This is not a recommendation but an advertising option.
Oscilloscope KnowledgeBase - Full Text Search
Jitter Measurement Optimization for Keysight Infiniium Oscilloscopes
Abstract
Tips on Optimizing a Jitter Measurement on a Keysight Real Time Infiniium Oscilloscope 1. Keep the sampling rate as high as possible, and use sinx/x (on by default) 2. Make sure the threshold is in the center of the waveform. 3. After one does an autoscale, use the Vernier mode (push in the channel knob or click on the scale in the GUI) to further maximize the waveform on screen. 4. Turn on a Rise Time measurement (make sure the cursors are at the 10-90% levels; if not check the measurement thresholds).
Tips on Optimizing a Jitter Measurement on a Keysight Real Time Infiniium Oscilloscope 1. Keep the sampling rate as high as possible, and use sinx/x (on by default) 2. Make sure the threshold is in the center of the waveform. 3. After one does an autoscale, use the Vernier mode (push in the channel knob or click on the scale in the GUI) to further maximize the waveform on screen. 4. Turn on a Rise Time measurement (make sure the cursors are at the 10-90% levels; if not check the measurement thresholds).
| Application: | Signal Analysis |
| Industry: | |
| Author: | Keysight |
| External Link to complete AppNote/Whitepaper: | |
| Published: | 10-08-2020 |
Video
339 hits
- You are here:
-
Home
-
KnowledgeBase
- Jitter Measurement Optimization for Keysight Infiniium Oscilloscopes