How to resolve AdBlock issue?
Oscilloscope News |
27 October 2015 - A new option from Rohde & Schwarz permits R&S RTO oscilloscopes to trigger on DSI- and CSI-2 specific protocol data of MIPI D PHY interfaces and to decode the acquired waveforms into readable protocol content. The R&S RTO-K42 software option supports developers during the design, verification and debugging of MIPI D-PHY based interfaces. These interfaces are mainly used in cameras and displays in smartphones and tablets as well as in other electronic devices.
22 October 2015 -Yokogawa added new products to the range of plug-in measurement modules for Yokogawa’s DL850E/DL850EV ScopeCorder family, bringing the total number of modules available to 19. The new units are the 720211 high-speed (100 MS/s) 12-bit isolation module, the 720243 SENT monitor module (available only for the DL850EV Vehicle Edition ScopeCorder) and the 720254 4-channel 1 MS/s 16-bit isolation module.
21 October 2015 – Tektronix announced the industry’s first fully automated physical layer transmitter test solution for the MIPI M-PHY 3.1 specification and Conformance Test Suite (CTS) 3.1. The solution supports M-PHY High Speed Gears 1, 2 and 3, PWM Mode (G0-G7), and SYS Mode and offers the industry’s lowest noise solution for M-PHY measurements when used with Tektronix DPO70000SX or MSO/DPO70000DX oscilloscopes and P7600 series probes.
12 October 2015 - LabNation launched its open source USB oscilloscope, SmartScope. The development was funded by a Kickstarter campaign commenced in 2014. SmartScope runs on multiple operating systems and platforms such as smartphones, tablets and PCs. The lightweight SmartScope is powered directly from the host’s USB interface and combines the multiple functions of an oscilloscope, logic analyser and a waveform generator in an aluminium case measuring just 110.0 x 64.0 x 24.2 mm.
05 October 2015 - Tektronix announced that its comprehensive set of analysis tools for emerging PAM4 modulation now operates on both DPO70000SX 70 GHz real time and DSA8300 equivalent time oscilloscopes. PAM4 is being adopted in the latest 400 Gigabit Ethernet standard by the IEEE P802.3bs working group for 400G (typically 8 x 50G) electrical and optical interfaces. Compared to traditional NRZ that uses two-level signaling, the four-level scheme used in PAM4 significantly increases signal complexity and places new demands on test equipment for performance and noise sensitivity.
02 October 2015 – Anritsu Corporation and Teledyne LeCroy have signed an agreement providing for Anritsu to become an authorised reseller of Teledyne LeCroy products in the UK and Ireland. Under this agreement Anritsu will provide the local sales and support service for Teledyne LeCroy in UK and Ireland, including customer demonstrations and technical support. The agreement also includes the transfer of Teledyne LeCroy sales staff in UK to Anritsu EMEA Ltd.
30 September 2015 - Tektronix announced the expansion of its DPO70000SX Performance Oscilloscope Series to include 50 GHz and 23 GHz models. By extending the flagship 70 GHz model, the new 50 GHz product is ideal for engineers and researchers who want to take advantage of the superior low-noise performance of the patented asynchronous time interleaving (ATI) architecture for technologies such as 28 GBaud PAM4 and Kband frequency testing.
29 September 2015 – Tektronix implemented the SignalVu software on its family of DPO70000SX ATI Performance Oscilloscopes. This will allow researchers and others engaged in developing next generation wide- and ultra-wide bandwidth technologies such as 5G, cellular backhaul and radar to perform RF modulation measurements with unprecedented margins of error.
28 September 2015 — Teledyne LeCroy introduced the IQS series of Coherent Optical Receivers, featuring the industry’s highest bandwidth. When combined with Teledyne LeCroy’s LabMaster 10Zi-A oscilloscopes and integrated Optical-LinQ analysis software, the IQS receivers test DP-QPSK and DP-16QAM optical signals at speeds up to 130 GBaud.
03 September 2015 – Keysight Technologies announced a new compliance application for characterizing and testing of APIX2 (Automotive Pixel Link) high-speed SerDes (serialiser/deserialiser) technology using the Keysight Infiniium Series oscilloscopes. Developed by Inova Semiconductors, APIX2 is a multi-channel technology for high-resolution in-car video applications. APIX2 can establish multiple display links with a bandwidth of up to 3Gbps, over two pairs of copper cables or a single QSTP cable, and supports HD video at 24 bit color depth.
