Did you know? |
The vertical resolution of a conventional oscilloscope is only 8 bits which equals 256 steps. If you need to see more details look for a scopes with a resolution of 12 bit (i.e. 4,096 steps). Read more...
Latest Oscilloscope News |
High-speed Digital Analyzer enhances Oscilloscopes with 18 channels @ 12.5-GS/s
01 February 2016 – Teledyne LeCroy introduced the HDA125 High-speed Digital Analyzer for its oscilloscopes. The HDA125 digital acquisition system captures 18 channels of digital data at 12.5 GS/s. Adding it to Teledyne LeCroy oscilloscopes by means of the LBUS interface architecture results in a flexible, high-performance mixed-signal solution. Also announced is the QuickLink probing system, featuring low-cost, high-fidelity probe tips that work with both the HDA125 and Teledyne LeCroy WaveLink probes using the new Dxx30-QL QuickLink adapter.
Crosstalk Analysis with Real-Time Oscilloscopes
28 January 2016 - Keysight Technologies announced the comprehensive N8833A and N8833B crosstalk analysis application to assist in the diagnosis of crosstalk. The application not only detects and quantifies the presence of crosstalk, but it can determine which aggressors are primarily responsible. Furthermore, the application can go one step further by actually removing the crosstalk from the victim waveform so engineers can visually compare the original waveform with the clean waveform side-by-side.
Precision Phase Noise Measurement Technique - Part 2
In the first part of this article a simple phase noise measurement technique with a resolution of 10 ps was explained. There are other techniques, which could enhance the performance of the measurement to sub-picoseconds. That is the subject of this article.
NI releases next Version of VirtualBench All-in-One Instrument
22 January 2016 – National Instruments (NI) launched a new, high-performance model of VirtualBench. The software-based VirtualBench all-in-one instrument combines a mixed-signal oscilloscope, function generator, digital multimeter, programmable DC power supply and digital I/O. With 350 MHz of bandwidth, four analog channels and Ethernet connectivity, the new version of VirtualBench offers increased functionality for engineers characterizing and debugging new designs or automated test systems.
Quickly Characterize and De-embed Interconnects
19 January 2016 – Tektronix introduced a new solution to simplify the process of characterizing and de-embedding the effects of cables, fixtures and other interconnects for more accurate and repeatable measurement results. The solution consists of SignalCorrect software and the TSC70902 calibration source and works with Tektronix DPO/MSO70000 real-time oscilloscope.
Automated Test Capabilities for HDMI v2.0 and Embedded DisplayPort
14 January 2016 – Teledyne LeCroy announced the addition of QPHY-HDMI2 and QPHY-eDP, expanding its automated transmitter test solutions for display standards to include HDMI Version 2.0, and Embedded DisplayPort. Teledyne LeCroy’s QualiPHY automated compliance test solution platform reduces the time, effort, and specialized knowledge needed to perform compliance testing on high-speed serial buses.
USB 3.1 Gen 2 Protocol Trigger and Decode Software
13 January 2016 – Keysight Technologies introduced the industry’s first oscilloscope-based USB 3.1 Gen 2 10 Gbps protocol decode software with real-time triggering and protocol decode performance. The Keysight N8821A USB 3.1 protocol trigger and decode software enables engineers to verify and debug their Gen 2 10 Gbps interfaces.
Oscilloscope Basics |
Oscilloscope Probes – Vital Link in the Measurement Chain
Signal measurement results can only be as accurate as the test and measurement tools in use. As clock rates and edge speeds of today’s electronic circuits increase, probing becomes a critical piece of the measurement system – the component that comes in direct contact with your circuit. This article looks at voltage probing considerations for embedded system and digital design debugging applications.
Read more ...
Oscilloscope Background |
Fast and efficient EMI Debugging with Oscilloscopes
Oscilloscopes featuring high sensitivity and dynamic range combined with powerful FFT capabilities are ideal tools for EMI debugging. Electromagnetic interference from electronic circuits and boards can be detected and analyzed with high speed and accuracy.
Read more ...