Did you know? |
Can a digitizer be used as an oscilloscope? Read more...
Latest Oscilloscope News |
New 30GHz Sequential Sampling Oscilloscope
10 May 2023 - Pico Technology announced major updates and additions to their PicoScope PC-based 9000 Series oscilloscopes. New to the product spectrum are a 30 GHz bandwidth model of the 9300 sampling oscilloscope series and updated 5 GHz, 16 GHz, and 20 GHz models of the 9400 series.
New 4-Channel Digital Storage Oscilloscope
24 March 2023 - Acute launched a new 4-Channel Digital Storage Oscilloscope (DSO). The new TravelScope 3000 (TS3000) offers a bandwidth of 200 MHz and a sample rate of 1 GS/s. The instrument supports also a DSO stack mode, in which up to 4 devices (16 channels) can be stacked together in the same time. More than 20 types of waveform measurements with customized threshold settings features, provide real-time update for vertical, time and channel to channel timing measurements with statistic features.
Rohde & Schwarz Oscilloscope Days 2023
23 March 2023 — Following increasing global interest from electronics engineers, the popular Rohde & Schwarz Oscilloscope Days event will continue in 2023. The two-day event is scheduled for April 18 and 19 and will present a series of webinars from Rohde & Schwarz oscilloscope experts and specialists along with others from event partners Würth Elektronik and PE-Systems. The sessions will address the real-world challenges engineers face in a range of measurement applications.
CAN FD/LIN Monitor module
20. March 2023 - Yokogawa released the 720245 CAN FD/LIN monitor module for development and evaluation of automobiles, trucks, and vessels. The CAN FD/LIN monitor module can be used to decode the CAN FD or LIN-Bus signals and display information on physical data like engine temperature, vehicle speed and brake-pedal position as analog waveforms and compare this with the data coming from real sensors.
Oscilloscope Probes are essential parts of the measurement chain
28 February 2023 - The oscilloscope probe is an essential part of the measurement chain. Some measurements would not even be possible without probes e.g. current measurements or high voltage measurements. So don’t forget to have a special look on the probes when you setup a measurement. On OScopes.info we published over the years a large variety of information on oscilloscope probes and probing in different forms: news, whitepapers, application notes, videos and webinars. Following we have compiled an overview for you.
Time-correlated USB4 Analysis of Oscilloscope and Protocol Analyzer
02 February 2023 – Teledyne LeCroy announced the extension of their patented CrossSync PHY technology to USB4 signaling over USB Type-C connectors. CrossSync PHY enables waveforms from Teledyne LeCroy oscilloscopes to be viewed alongside protocol analyzer traces, with complete time-correlation of electrical and protocol information for easy and powerful validation and root-cause analysis.
PCI Express 6.0 Electrical Testing
23 January 2023 - Teledyne LeCroy announced new software tools for PCI Express 6.0 electrical test and validation: QPHY-PCIE6-TX-RX fully automated test software, as well as SDAIII-PCIE6 and SDAIII-PAMx characterization and debug software packages. The new software tools support faster 64 GT/s data transfer speeds using PAM4 multi-level signaling. The tools can be used with a Teledyne LeCroy LabMaster 10 Zi-A oscilloscope.
- Oscillocope KnowledgeBase with more than 100 free Whitepapers, Webinars and Application Notes
- Cascadable Oscilloscopes featuring 4, 8 or more Channels
- Test Solution for 10 Mb/s In-Vehicle Designs
- USB4 Version 2.0 Physical Layer Testing
- Acute launched new 6-in-1 Instruments
- Test Solutions for new USB4 Version 2.0 Specification
- PMK will announce new Probes on electronica 2022
Page 11 of 78
Oscilloscope Basics |
Oscilloscope Probes – Vital Link in the Measurement Chain
Signal measurement results can only be as accurate as the test and measurement tools in use. As clock rates and edge speeds of today’s electronic circuits increase, probing becomes a critical piece of the measurement system – the component that comes in direct contact with your circuit. This article looks at voltage probing considerations for embedded system and digital design debugging applications.
Oscilloscope Background |
A simple method to verify the bandwidth of your probe
In oscilloscopes or oscilloscope probes, bandwidth is a measure of the width of a range of frequencies measured in Hertz. Specifically, bandwidth is specified as the frequency at which a sinusoidal input signal is attenuated to 70.7 percent of its original amplitude, also known as the -3 dB point. Most oscilloscope companies design the scope/probe response to be as flat as possible throughout its specified frequency range, and most customers simply rely on the specified bandwidth of the oscilloscope or oscilloscope probes, wondering if they are indeed getting the bandwidth performance at the probe tip. Now you can use these step-by-step instructions to simply measure and verify the bandwidth of your probe with an oscilloscope you may already have.