How to resolve AdBlock issue?
Oscilloscope News |
31 October 2016 - Pico Technology launched a new family of high-performance microwave and gigabit test probes. The PicoConnect passive probes allow cost-effective fingertip browsing of broadband signals or data streams out to 9 GHz or 18 Gb/s. These include the now ubiquitous USB 2 & 3, HDMI 1 & 2, Ethernet, PCIe, SATA and LVDS standards.
26 October 2016 – National Instruments (NI) announced the PXIe-5164 oscilloscope featuring 100 Vpp maximum input range at 1 GS/s and 14 bits resolution. The PXIe-5164 is built on the open, modular PXI architecture, and includes a user-programmable FPGA to help aerospace/defense, semiconductor and research/physics applications that require high-voltage measurements and high levels of amplitude accuracy.
20 October 2016 - Tektronix introduced a complete CAN FD protocol trigger, decode and search solution for its MDO3000 and MDO4000C Series of mixed domain oscilloscopes. The solution helps automotive engineers to meet consumer demand for more capable and sophisticated electronic modules and integrated systems. Automobile manufacturers are increasingly adopting the CAN FD (Controller Area Network with Flexible Data Rate) protocol which allows them to transmit more data inside vehicles.
13 October 2016 - Yokogawa announces support for Peripheral Sensor Interface 5 (PSI5) bus analysis on its 8 channel DLM4000 and 2 and 4 channel DLM2000 oscilloscopes. Yokogawa’s PSI5 support is a first for the industry, and makes its oscilloscopes uniquely useful for automotive designers and engineers.
28 September 2016 - The new R&S RTx-K76 CXPI serial triggering and decoding option from Rohde & Schwarz allows users to analyze the clock extension peripheral interface (CXPI) communications bus with R&S RTE and R&S RTO oscilloscopes. Users can decode all protocol details and isolate anomalies by triggering on the corresponding details. This significantly accelerates design verification and implementation of CXPI interfaces.
26 September 2016 – Teledyne LeCroy announced two new products for testing optical links. The OE6250G O/E converter is a high performance optical-to-electrical converter available for real-time oscilloscopes, with 25 GHz of optical bandwidth. The IQS25 Coherent Optical Receiver joins the IQS product family as a lower-cost alternative to the high-performance IQS42 and IQS70 receivers, providing a high-value instrument for testing coherent links up to 32 Gbaud.
21 September 2016 – Teledyne LeCroy previewed the new HVFO high voltage fiber-optically isolated oscilloscope probe at the IEEE Energy Conversion Congress and Expo (ECCE) 2016 exhibition in Milwaukee, Wisconsin (USA). The HVFO is an affordable, optimally designed probe for measurement of small signals floating on a HV bus in power electronics designs. Optical isolation between the probe tip and the oscilloscope input reduces adverse loading of the device under test (DUT); and also reduces noise, distortion, ringing, overshoots, and transients on the measured signal.
19 September 2016 – Tektronix announced a series of enhancements to its optical modulation analyzer (OMA) software. The latest release provides optical research engineers with the ability to evaluate multi-channel coherent modulation schemes with confidence using a single measurement system. Engineers can now calibrate and control multiple OMA’s to easily acquire and analyze simultaneous data from multiple channels such as different wavelengths or fiber cores.
30 August 2016 - Teledyne LeCroy introduces the HDO9000 High Definition Oscilloscopes, which unveil HD1024 high definition technology that automatically optimizes vertical resolution under each measurement condition to deliver 10 bits of vertical resolution. The HDO9000 High Definition Oscilloscopes offer 10-bit resolution, bandwidths of 1 GHz to 4 GHz and sample rates of 40 GS/s, enabling efficient and accurate debug in high definition. Two units can be synchronized to operate as 8-Channel Oscilloscope without limitations, another unique feature in these high performance oscilloscopes.
16 August 2016 - Tektronix started shipping of the IsoVu Measurement System previewed earlier this year at the APEC 2016 show. Pricing for the optically isolated measurement system starts at $12,000. IsoVu Technology combines 1 GHz bandwidth, wide common mode range, with superior Common Mode Rejection to make previously hidden signals visible.
Related Articles:
- You are here:
-
Home
- News