Oscilloscope News

Tek AFG31000s23 October 2019 - Tektronix offers a new software plugin for its AFG31000 Arbitrary/Function Generator that makes it possible to perform crucial double pulse testing in less than a minute, saving a significant amount of time when compared to alternative methods. Measurements are taken with an oscilloscope.

TLC waverunner9000 r15 October 2019 - The new I3C Trigger+Decode (TD) option for Teledyne LeCroy Oscilloscopes provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities. The also new TDME option adds Measure/Graph (M) capability with automated measurement and graphing tools and Eye Diagram (E) capability for physical layer signal assessment and debug. Extract digital sensor data and plot it as a waveform. Easily correlate I3C traffic to other signals in mobile, handheld, and battery-powered embedded systems.

TLC mda8000hd03 October 2019 – Teledyne LeCroy announced its new MDA 8000HD Motor Drive Analyzers, which leverage the new WaveRunner 8000HD High Definition Oscilloscope (HDO) platform of 8 analog channels, 12-bit vertical resolution at all times, up to 5 Gigapoints of acquisition memory (1.25 Gigapoints on all 8 channels), 10 GS/s sample rate, and bandwidths up to 2 GHz.

TLC waverunner8000hd01 October 2019 – Teledyne LeCroy introduced the WaveRunner 8000HD High Definition Oscilloscopes (HDO), the world’s only 8-channel, 12-bit resolution, 2 GHz instruments. WaveRunner 8000HD leverages the company’s HD4096 High Definition technology and a 15.6” touchscreen, high channel counts, and 5 Gigapoints of acquisition memory in critical applications such as high-power/three-phase power conversion, automotive electronics, power integrity and power sequencing, and embedded control systems.

RS Auto24 September 2019 - The flexibility of Automotive Ethernet makes the simple twisted-pair network technology ideal for an ever-increasing range of in-vehicle networks. The new IEEE 10BASE-T1S standard expands the range of applications supported by Automotive Ethernet to include integrating simple devices into the network. Rohde & Schwarz presented the first compliance test solution for testing device-compliance to 10BASE-T1S.

Saker HVCP Probe16 September 2019 - SAKER announces the world’s first Rogowski fiber isolated current probe for measuring AC currents in high voltage areas, power electronics, medium voltage motors and electric grids. Its main applications are medium voltage power quality, distribution grids and medium voltage drives testing.

RS RTP12 September 2019 - With new 13 GHz and 16 GHz models, the compact multi-purpose R&S RTP oscilloscope family is now scalable from the 4 GHz minimum up to the full 16 GHz bandwidth. Additional new highlights are powerful debugging functions such as the high-speed serial pattern trigger using hardware-based clock-data-recovery (CDR) up to 16 Gbps, or the DDR4 signal integrity and compliance test.

Keysight UXR Series10 September 2019 - Keysight Technologies announced the first single box multi-channel solution for wideband mmWave measurements. Available for Keysight UXR-Series of oscilloscopes the solution enables fast, affordable, coherent analysis for wideband measurements up to 110 GHz; accelerating development of next generation mmWave communications, satellite communications and radar applications.

Hantek DPO600030 August 2019 - Hantek launched the DPO6000 series 4 channel digital phosphor oscilloscope. DPO6000 series has 6 functions: 4 channel oscilloscope, 16 channel logic analyzer, 2 channel waveform generator, digital voltmeter, serial protocol analyzer and FFT spectral analysis. It offers a bandwidth of up to 200MHz, a memory depth of 64 Mpts and supports segmented storage (up to 80,000).

Pico dali28 August 2019 - Pico Technology has added DALI decoding and analysis with the latest version of PicoScope 6 software. DALI (Digital Addressable Lighting Interface) provides two-way communications between lighting fixtures (“luminaires”), ballasts and controllers. A DALI controller can talk to individual LED drivers and ballasts, and those devices can in turn talk back to the controller to report light failures, energy consumption, ambient light conditions and so on.

Related Articles:

No related articles found


 

 Advertising