How to resolve AdBlock issue?
Oscilloscope News |
08 February 2019 - Teledyne LeCroy launched its 3-Phase Power Analysis software package, which brings 1-phase and 3-phase static and dynamic power analysis to its HDO8000A, HDO6000A and WavePro HD 12-bit High Definition oscilloscopes.
06 February 2019 - Keysight Technologies announced the industry's first comprehensive double data rate (DDR) 5.0 test solution. Keysight's total solution approach to DDR5 testing includes a new receiver, transmitter, and protocol test solutions. This will enable the ability to perform all test requirements in the DDR5 design specification.
04 February 2019 – Teledyne LeCroy announced support for PCI Express 5.0 physical layer testing with an advantage in calibration and test completion time, expanding on what is already an extensive set of PCI Express test solutions.
29 January 2019 - Siglent launched the new economical, high performance SDS5000X series of digital storage oscilloscopes, which are available in 2 or 4 channel versions with bandwidths of 350MHz, 500MHz, and 1GHz. With a maximum sample rate of 5GSa/s, these scopes offer a maximum record length of 250Mpts to allow for deep memory investigation of glitches and infrequent events, and they also have the option of 16 digital channels for true mixed signal analysis.
21 January 2019 - Rohde & Schwarz has extended the application range of its R&S RTB2000, R&S RTM3000, and R&S RTA4000 oscilloscopes with a new option for frequency response analysis. Equipped with the R&S RTx-K36, the oscilloscopes can display Bode plots for both phase and gain against frequency simultaneously. With the new software option, users can analyze the response to frequency changes from 10 Hz up to 25 MHz without any additional piece of equipment and at a fraction of the price of dedicated solutions.
09 January 2019 - Keysight Technologies announced the 200 MHz, 4-channel models of the InfiniiVision 1000 X-Series oscilloscopes, providing professional-level measurements and capabilities at an affordable price, including 4-wire Serial Peripheral Interface (SPI) decode and remote connection via local area networks (LANs).
10 December 2018 - The new Siglent SDS2000X-E 200/350MHz Oscilloscopes offer a sampling rate of 2GSa/s with standard record length of 28Mpts/channel, an impressive waveform capture rate of up to 400,000 frames/sec and it supports multiple powerful triggering modes. The new economical Super Phosphor Oscilloscopes are available in 200MHz and 350MHz bandwidths.
28 November 2018 - Acute Technology Inc. offers a free CAN-FD trigger and decode upgrade for its TravelScope series DSO. The PC based Acute TS2212H and TS2212B oscilloscopes feature 2 channels with 200 MHz bandwidth and a sampling rate of 1 GS/s and include built-in frequency generator, DVM and digital frequency counter.
23 November 2018 - Pico Technology introduced the TA368 Pico D9 flex current probe. The TA368 is a flexible AC current probe utilizing the Rogowski principle and featuring a built-in integrator. Equipped with the Pico D9 probe interface, it is designed exclusively for use with the PicoScope 4444 Differential Oscilloscope, which powers the probe and automatically sets the PicoScope software to the correct range and units.
19 November 2018 - The Cleverscope CS448 is a isolated four-channel 200MHz 14-bit oscilloscope designed to measure high voltage, fast slew-rate signals such as those in a full or three-phase power electronic switching bridge. With new 300MHz 200x probes it can now handle 1600V signals to cope with the latest SiC MOSFETs.
